Reliable protection for corners and edges
So there’s no rub
For all angular or round packing units, edge protectors offer effective protection from damage during transport. Fits perfectly for round barrels or octabins. Simply fix to the edges of the cargo and the journey will be significantly safer.
In load safety, edge protectors are an important tool for protecting the cargo from the forces involved in lashing down or for interconnecting several units of cargo in order to then be able to use a single lashing device. Thus, big time savings can be achieved by bundling cargo.
One-way load securing of barrels or octabins with MULTi-Cargo edge protectors chemie
- Perfect load securing of octabins and drums on pallets
- No slipping sideways or toppling of units of cargo
- Reduces the number of necessary lashing straps
- For one stack (2 octabins or drums next to each other) only one lashing strap is needed
- The cargo no longer needs to be packed with additional top or side pallets
- Massive timesaver during loading and unloading
- Simple disposal via waste paper cycle
Specification “High Strength Edge Protector” (according to GTÜ/society for technical monitoring requirements)
For load securing of octabins the following specification was approved by the GTÜ:
Leg length 100 x 100 mm
Wall thickness 9 mm
Length 1100 mm (for example euro pallets with drums of 2 x 210 litres)
Withstands at least 5000 N (three point bending flexural test according to DIN EN 13393)
GTÜ Certificate number: LS-25007-12+42-02/GTÜ